SR-2501RGB - Easy RGB receiver

The SR-2501RGB works via an RF signal linking it to the Easy RGB desktop remote control or the Easy RGB Wall Plate. It has 4 channels of output. However, as the Easy RGB controller operates only RGB it only utalizes 3 channels. meaning it can drive red , green and blue LED fixtures such as LED RGB Tape and RGB Spotlights/Downlights. It comes equipped with an receiving signal indicator and a learning button for quick and easy link up to the remote. 


Use this receiver in conjunction with the Easy RGB Desktop Remote/Wall Plate

Parameters
Input voltage: 12-36V DC
Input Signal: RF
Output voltage: 12-36V DC
Output PWM channels: 3/4
Output Amps (per channel): 5A (15A overall)
Output Wattage (per channel): 60W @ 12V, 120W @ 24V.

Note: Please do not exceed the maximum output as this could cause the receiver to fail. All PSU's that supply these receivers must be fused with the correct fuse in place. A competent person must perform this installation.

For more information on any of our products please get in touch