SR-1003RC - Colour Touch 10 RGBW Receiver

SR-1003RC - Colour Touch 10 RGBW Receiver

The SR-1003RC works via an RF signal linking it to the Colour Touch 10 RGBW/(Y) remote control. It has 4 channels of output meaning it can drive red , green, blue and White LED fixtures such as LED RGB/W Tape and Spotlights/Down-lights such as the 8W LED RGBW Downlight. It comes equipped with an receiving signal indicator and a learning button for quick and easy link up to the remote. 

Install each receiver within the zone you wish you control. If your 10 zones comprise of 10 separate rooms then you would install a receiver in each room. To operate each room you must be within 20M of the receiver you wish to control. If you wish to control all your LED lights from one position only then the SR-1003RCDMX with multiple SR-2012B DMX decoders may be more suitable.

Use this receiver in conjunction with the Colour Touch 10 RGBW/(Y) Remote 

Parameters
Input voltage: 12-36V DC
Output voltage: 12-36V DC
Output PWM channels: 4
Output Amps (per channel): 5A (20A Overall)
Output Wattage: 60W @ 12V, 120W @ 24V, 180W @ 36V

RF to DMX option: SR-1003RCDMX (Control distant zones all from one position)

Note: Please do not exceed the maximum output as this could cause the receiver to fail. All PSU's that supply these receivers must be fused with the correct fuse in place. A competent person must perform this installation.

For more information and manuals on any of our products please get in touch via our contacts page.